Hinkley-lighting LEDGEWOOD 1126 Bedienungsanleitung PDF herunterladen

assembly instructions

Family: Ledgewood Item No. 1126 VK/MR

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

1. Prepare mounting strap (A) by threading the two 1 1/4” long mounting screws (B)

into the back of the gull wing bracket - see Drawing 1.

• Be sure the holes into which the screws are threaded match the spacing of holes (D)

in the back plate (E) - see Drawings 1 and 2.

2. Attach mounting strap (A) to junction box (J) using two 1” screws (C) provided - see

Drawing 2.

1. To install glass, remove threaded socket ring (3) from socket (1) - see Drawing 3.

2. Place glass (2) over exposed section of socket (1).

3. Thread socket ring (3) onto socket (1) to secure glass (2).

4. Fixture can now be lamped accordingly.

*** The construction of this ﬁxture will be accomplished by ﬁrst mounting the

mounting strap to the junction box, making all necessary electrical connections,

mounting the ﬁxture to the wall, and then installing the glass.

start here

1126

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Note: Maximum wattage for 1126 ﬁxture is 60 watts per bulb.

Drawing 1 - Strap Detail

Drawing 2 - Fixture Mounting

(side view)

gull wing

bracket

backplate

Drawing 3 - Fixture Assembly

Make electrical connections from supply wire to ﬁxture lead wires. Refer to instruction

sheet (I.S. 18) and follow all instructions to make all necessary wiring connections. Then

refer back to this sheet to continue installation of this ﬁxture.

1. To mount ﬁxture, slide backplate (E) over screws (B) and secure with ball knobs (F) -

see Drawing 2.

2.7.08

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2 3

Inhaltsverzeichnis

Seite 1 - Drawing 3 - Fixture Assembly

assembly instructionsFamily: Ledgewood Item No. 1126 VK/MR 1. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3. C

Seite 2

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Seite 3 - Caulking Instruction____

I.S.200 Caulking Instruction____start here---Drawing

Kommentare zu diesen Handbüchern

Keine Kommentare

Hinkley-lighting LEDGEWOOD 1126 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hinkley-lighting LEDGEWOOD 1126 herunter. Hinkley Lighting LEDGEWOOD 1126 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hinkley-lighting LEDGEWOOD 1126