Hinkley-lighting ZELDA 3447PN Bedienungsanleitung PDF herunterladen

assembly instructions

Item No. 3447

1. Find a clear area in which you can work.

2. Unpack xture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this xture will be accomplished by rst determining the length of

stem required, attaching the mounting strap to the junction box, making all necessary

elctrical connections, hanging the xture from the ceiling, and then installing the glass.

start here

3447

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

1. Determine the overall length you will need the assembled xture to be.

2. Determine what stems will be needed to achieve the overall length you require.

(Additional stems are available and can be ordered. Ask your local Hinkley Lighting representa-

tive or visit www.hinkleylighting.com for information.)

3. Install stems by slipping them onto the supply wire of the xture, threaded end down, and

threading them together.

Make electrical connections from supply wire to xture lead wires. Refer to instruction sheet (I.S.

18) and follow all instructions to make all necessary wiring connections. Then refer back to this

sheet to continue installation of this xture.

1. To install glass, remove socket ring (2) and spacer (3) from socket (1) - see Drawing 3.

2. Slip glass (4) over socket (1) followed by spacer (3), and hold in position.

3. Thread on socket ring (2) to secure glass.

Drawing 3 - Glass Installation

Drawing 2 - Fixture Mounting

Drawing 1 - Strap Detail

1. Prepare mounting strap (B) for mounting by installing screws (A) into mounting

plate (B) - see Drawing 1.

• Be sure the holes into which the screws are threaded match the spacing of holes (C)

in the canopy (D) - see Drawings 1 and 2.

2. Attach mounting plate (B) to junction box (J), using screws (G) provided and slip

supply wires through large center hole.

1. Hang the xture by slipping canopy (D) over screws (A) and hold in position - see Drawings 1

and 2.

2. Thread ball knobs (E) onto end of screws (A) and tighten to secure xture to ceiling.

6.1.12

HINKLEY LIGHTING 33000 Pin Oak Parkway Avon Lake, Ohio 44012 800-446-5539 www.hinkleylighting.com

1 2

Item No. 3447 1

Inhaltsverzeichnis

Seite 1 - Item No. 3447

assembly instructions Item No. 3447 1. Find a clear area in which you can work.2. Unpack xture and glass from carton.3. Carefully review instructions

Seite 2

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Verwandte Modelle: ZELDA 3447VS

Kommentare zu diesen Handbüchern

Keine Kommentare

Hinkley-lighting ZELDA 3447PN Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hinkley-lighting ZELDA 3447PN herunter. Hinkley Lighting ZELDA 3447PN User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: ZELDA 3447VS

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hinkley-lighting ZELDA 3447PN