Hinkley-lighting HARLOW 4210BC Bedienungsanleitung PDF herunterladen

assembly instructions

Family: Harlow Item No. 4210

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

1. To mount ﬁxture, slip center hole of backplate (E) over nipple (C) and hold ﬁxture in

position - see Drawing 1.

2. Thread decorative knob (D) onto end of nipple (C) and tighten to secure ﬁxture.

*** The construction of this ﬁxture will be accomplished by ﬁrst attaching the

mounting strap to the junction box, making all necessary electrical connections,

mounting the ﬁxture to the wall, and then installing the glass.

start here

4210

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Note: Maximum wattage for 4210 ﬁxture is 60 watts per bulb.

Drawing 1 - Fixture Mounting

Drawing 2 - Glass Installation

Make electrical connections from supply wire to ﬁxture lead wires. Refer to instruction

sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.

Then refer back to this sheet to continue installation of this ﬁxture.

4.28.10

1. Prepare mounting strap (A) by threading 1-5/8” nipple into the center hole of the

mounting strap (A), approximately 1/4“.- see Drawing 1.

2. Attach mounting strap (A) to junction box (J) using two 1” screws (C) provided.

3. Slip lock washer (F1) over nipple (C) and thread hex nut (F) onto nipple (C).

4. Hex nut (F) can be tightened against mounting strap (A) after adjusting nipple (C) to

proper mounting lengths.

1. To install glass (1), pinch spring clip (2) together and slip ends of clips onto hole in

bottom of glass - see Drawing 2.

2. Slowly release clips (2) and slip glass (1) down into position on glass holder (3).

3. Fixture can now be lamped accordingly.

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2 3

Drawing 1 - Fixture Mounting 1

Inhaltsverzeichnis

Seite 1 - Drawing 1 - Fixture Mounting

assembly instructionsFamily: Harlow Item No. 4210 1. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3. Carefully

Seite 2

HINKLEY LIGHTING 12600 Berea Road Cleveland, OH 44111 800.446.5539 / 216.671.3300 www.hinkleylighting.comI.S. 18 wiring grounding instru

Seite 3

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Verwandte Modelle: HARLOW 4210PN

Kommentare zu diesen Handbüchern

Keine Kommentare

Hinkley-lighting HARLOW 4210BC Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hinkley-lighting HARLOW 4210BC herunter. Hinkley Lighting HARLOW 4210BC User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: HARLOW 4210PN

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hinkley-lighting HARLOW 4210BC