Hinkley-lighting SPLENDOR 4928BN Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hinkley-lighting SPLENDOR 4928BN herunter. Hinkley Lighting SPLENDOR 4928BN User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 3
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
assembly instructions
Item No. 4928
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the main
body of the fixture, making all necessary electrical connections, hanging the fixture
from the ceiling and then installing the fixture shade.
start here
4928
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Note: It will be necessary to determine the length of rods you will require to hang your
fixture at the desired height. After this has been established, please follow the
instructions below.
Drawing 1 - Assembly
Drawing 2 - Assembly
1.1.13
2. Slip first rod section (B) along wire and thread into top of main fixture body (A).
3. Slip next section of rod (C) along wire and thread into top of previously installed
rod.
4. Continue adding sections of rod until all necessary length have been attached to
the fixture.
5. Fixture can now be mounted to the ceiling by following mounting instruction sheet
(IS19-81) provided.
1. Slip center column (1) along wire and thread onto top of body (2) and tighten- see
Drawing 1..
H I N K L E Y LIG H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 8 0 0 . 4 4 6 . 5 5 3 9 / 4 4 0 .653.5500 hinkleylighting.com
B
C
A
1
2
3
4
6
5
1. To complete assembly slip glass bobesche (6) over socket (5) - see Drawing 2.
2. Fixture can be lamped accordingly at this point, and power can be restored.
6. After fixture is installed slip bottom cap (3) onto thread tube (D) and hold in
position, and thread decorative ball (4) onto threaded tube (D) and tighten.
Seitenansicht 0
1 2 3

Inhaltsverzeichnis

Seite 1 - Item No. 4928

assembly instructionsItem No. 49281. Find a clear area in which you can work.2. Unpack fixture and glass from carton.3. Carefully review instructions p

Seite 2 - I.S. 19-81

HINKLEY L IGHTI N G 33000 Pin Oak Parkway Avon Lake, OH 44012 8 00. 4 4 6 .55 39 / 440.653.5500 hin kleyligh ting .com1. Shut off electrica

Seite 3

HINKLEY LIGHTING 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.comI.S. 18 wiring grounding instr

Kommentare zu diesen Handbüchern

Keine Kommentare