Hinkley-lighting REEF 1952 Bedienungsanleitung PDF herunterladen

assembly instructions

Family: Reef Item No. 1952 HE/VZ

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this ﬁxture will be accomplished by ﬁrst making all

necessary electrical connections, hanging the ﬁxture from the ceiling, and then

installing the glass.

start here

1952

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

1. Please refer to the hanging instruction sheet (I.S. 19) provided to hang this ﬁxture.

Then refer back to this sheet to install the glass.

Drawing 1 - Fixture Assembly

7.6.10

1. Prior to installing glass, it is necessary to install foam weather stripping in the roof of

the ﬁxture - see Drawing 3.

2. Cut 3 strips approximately 1-1/2” long from the foam weather stripping provided in

the parts bag with the ﬁxture.

Drawing 2 - Gasket Installation

foam weather

stripping

application

location

1. Fixture can now be lamped accordingly.

2. The glass in this ﬁxture is installed by lining up the three grooves (3) in the glass with

the three tabs located inside the roof - see Drawing 1.

3. To install glass (2) align grooves and slip glass up into roof. Turn glass clockwise to

lock it in.

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2

assembly instructionsFamily: Reef Item No. 1952 HE/VZ 1. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3. Carefu

Seite 2

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Keine Kommentare

Hinkley-lighting REEF 1952 Bedienungsanleitung