Hinkley-lighting FREEPORT 1804 Bedienungsanleitung PDF herunterladen

Family: Freeport Item No. 180

assembly instructions

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

*** The construction of this ﬁxture will be accomplished by mounting the mounting

strap to the junction box, making all necessary electrical connections, and then

mounting the ﬁxture to the wall.

start here

Drawing 3 - Fixture Assembly

1804

1. Prepare gem strap (A) for mounting, by threading the two screws (B) provided into

the back of the gull wing bracket on gem strap (A) - see Drawing 1.

• Be sure that holes into which the screws are threaded match the spacing of the

mounting holes (D) in the back plate (E) - see Drawings 1 and 2.

3. Mount gem strap (A) to junction box (J) using two 1” screws (C) provided.

Make electrical connections from supply wire to ﬁxture lead wires. Refer to instruction

sheet 18 (I.S. 18) and follow instructions to make all necessary wiring connections.

Then refer back to this sheet to complete installation of this ﬁxture.

1. Mount the ﬁxture by slipping the holes (D) in the backplate (E) over the screws (B)

in the mounting strap (A) - see Drawing 2.

2. Hold ﬁxture against wall and thread ball knobs (F) onto end of screw (B) showing

through the backplate (E).

Drawing 1 - Strap Detail

Drawing 2 - Fixture Mounting

(side view)

gull wing

bracket

backplate

1. Remove screws (2) from under roof (1). Make sure cage assembly (3) is supported

while removing screws. When last screw is removed the cage assembly can drop off

the ﬁxture - see Drawing 1.

2. Remove screws (4) that hold the glass clips (5) in place.

3. Glass (6) can now be lifted out of the cage assembly (3).

4. To replace glass, follow steps 1-3 in reverse order.

11.12.09

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2 3

Inhaltsverzeichnis

Seite 1 - Drawing 2 - Fixture Mounting

Family: Freeport Item No. 180Hassembly instructions1. Find a clear area in which you can work.2. Unpack ﬁxture and glass from carton.3. Careful

Seite 2

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Seite 3 - Caulking Instruction____

I.S.200 Caulking Instruction____start here---Drawing

Kommentare zu diesen Handbüchern

Keine Kommentare

Hinkley-lighting FREEPORT 1804 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hinkley-lighting FREEPORT 1804 herunter. Hinkley Lighting FREEPORT 1804 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hinkley-lighting FREEPORT 1804