Hinkley-lighting CAMERON FR42341PCM Bedienungsanleitung PDF herunterladen

fR42341pCM

FREDRICK RAMOND

A S S EMBLY INSTRU CT IO N S

Assembly of this ﬁxture will be accomplished assemblying main body,

attaching the mounting strap to the

electrical connections, and then hanging the ﬁxture from the ceiling.

SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]

and any additional directions. Turn power supply oﬀ during installation. If new wiring

is required, consult a qualiﬁed electrician or local authorities for code requirements.

S T E P 1

1 Prepare mounting strap (a) by threading the two longest screws (b) into the back

of the mounting strap (a), making sure the holes into which the screws are

threaded match the spacing of holes (d) in the backplate (e) - See Drawing 2.

2 Attach mounting strap (a) to junction box (j) using two screws (c).

3 Make electrical connections from supply wire to ﬁxture lead wires. Refer to

instruction sheet [FRIS18] and follow all instructions to make all necessary

wiring connections. Then refer back to this sheet to continue installation of

this ﬁxture.

4 To mount ﬁxture, slip the two mounting screws (b) through the two mounting

holes (d) in the backplate (e).

5 While holding ﬁxture in place, thread the two ball knobs (f) on to the end of the

mounting screws (b), and tighten.

S T E P 2

[DRAWING 1]

[DRAWING 2]

Replacement Parts: SHADE: R47341SH

01.01.12

8 00.421 . 3 5 17 WWW. F R EDR ICKR A M OND.COM

junction box, then making all necessary

To assembly main body of ﬁxture, slip wires from center column (1) of main body

assembly through center tube of upper column (2) - see Drawing 1.

Thread upper column (2) onto coupler (3) located at the top of the center column (1).

Fixture is ready for installation, please follow instructions below.

fR42341pCM FREDRICK RAMONDA S S EMBLY INSTRU CT IO N S Assembly of this ﬁxture will be accomplished assemblying main body, attaching the m

Keine Kommentare

Hinkley-lighting CAMERON FR42341PCM Bedienungsanleitung