Hinkley-lighting TRELLIS 1435 Bedienungsanleitung PDF herunterladen

Drawing 2 - Strap Detail

Drawing 3 - Fixture Mounting

Drawing 1 - Fixture Assembly

Family: Trellis Item No. 1434/1435/1438

assembly instructions

1434

1435

1438

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this ﬁxture will be accomplished by assembling main

body of ﬁxture, mounting the mounting strap to the junction box, making all

necessary electrical connections and then mounting the ﬁxture to the wall.

start here

1. To install glass (2) in cage assembly (1), slip bottom of glass panel into channel (7)

in the bottom of the cage - see Drawing 1.

2. Slip top of glass panel (2) under glass clip (6). Note: cut gasket material supplied to

3. fold over glass clip (6) to secure glass in cage (1).

4. Prior to attaching the cage, slip candle sleeve (5) over sockets.

5. To attach completed cage (2) to roof assembly (3) line up holes in cage top and roof.

6. Then thread ball knob stud (4) into roof to secure cage.

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

1. Prepare gem strap (A) for mounting, by threading the two screws (B) provided

into the back of the gull wing bracket on gem strap (A) - see Drawing 2.

• Be sure that holes into which the screws are threaded match the spacing of the

mounting holes (D) in the back plate (E) - see Drawings 2 and 3.

2. Mount gem strap (A) to junction box (J) using two 1” long screws (C) provided.

Make electrical connections from supply wire to ﬁxture lead wires. Refer to instruction

sheet 18 (I.S. 18) and follow instructions to make all necessary wiring connections.

1. Mount the ﬁxture by slipping the holes (D) in the back plate (E) over the screws (B)

in the mounting strap (A) - see Drawing 3.

2. Hold ﬁxture against wall and thread ball knobs (F) onto end of screw (B) showing

through the back plate.

Note: Maximum wattage for 1434 ﬁxture is 60 watts per bulb.

Maximum wattage for 1435 ﬁxture is 60 watts per bulb.

Maximum wattage for 1438 ﬁxture is 60 watts per bulb.

9.23.10

(side view)

gull wing

bracket

backplate

size and place between glass and clip.

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

1 2 3

Inhaltsverzeichnis

Seite 1 - Drawing 1 - Fixture Assembly

Drawing 2 - Strap DetailDrawing 3 - Fixture MountingDrawing 1 - Fixture AssemblyFamily: Trellis Item No. 1434/1435/1438assembly instructions14341

Seite 2

I.S. 18 wiring grounding instructionsSAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPL

Seite 3 - Caulking Instruction____

I.S.200 Caulking Instruction____start here---Drawing

Verwandte Modelle: TRELLIS 1434

Kommentare zu diesen Handbüchern

Keine Kommentare

Hinkley-lighting TRELLIS 1435 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hinkley-lighting TRELLIS 1435 herunter. Hinkley Lighting TRELLIS 1435 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: TRELLIS 1434

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hinkley-lighting TRELLIS 1435