Hinkley-lighting NEST FR41617ORB Bedienungsanleitung PDF herunterladen

fR41617ORB

NEST

ASSEMBLY INSTRUCTIONS

Assembly of this ﬁxture will be accomplished by ﬁrst determining the length of stem

required, attaching the mounting strap to the junction box, making all necessary

electrical connections, hanging the ﬁxture from the ceiling and then installing the

ﬁxture glass.

SAFETY WARNING: Read wiring and grounding instructions [FRIS 18]

and any additional directions. Turn power supply oﬀ during installation. If new wiring

is required, consult a qualiﬁed electrician or local authorities for code requirements.

STEP 1

1 Determine the overall length you will need the assembled ﬁxture to be.

2 Determine what stems will be needed to achieve the overall length you

require.(Additional stems are available and can be ordered. Ask your local

Fredrick Ramond representative or visit www.fredrickramond.com for

information.

3 Install stems by slipping them onto the supply wire of the ﬁxture, threaded end up,

and threading them together.

STEP 2

1 Prepare mounting strap (a) by threading the two longest screws (b) into the back

of the mounting strap (a), making sure the holes into which the screws are

threaded match the spacing of holes (d) in the backplate (e) - See Drawing 2.

2 Attach mounting strap (a) to junction box (j) using two screws (c).

3 Make electrical connections from supply wire to ﬁxture lead wires. Refer to

instruction sheet [FRIS18] and follow all instructions to make all necessary

wiring connections. Then refer back to this sheet to continue installation of

this ﬁxture.

4 To mount ﬁxture, slip the two mounting screws (b) through the two mounting

holes (d) in the canopy (e).

5 While holding ﬁxture in place, thread the two ball knobs (f) on to the end of the

mounting screws (b), and tighten.

STEP 3

1 Remove ring (1) and spacer (2) from socket (3) - See Drawing 2.

2 Slip glass (4) over socket and hold in position.

3 Slip spacer (2) and thread ring (1) onto socket (3) and tighten.

4 Fixture can now be lamped accordingly.

[DRAWING 1]

[DRAWING 2]

Bulbs: 100W MED. Replacement Parts: GLASS: R41617GL

6.11.09

800.421.3517 WWW.FREDRICKRAMOND.COM

See Drawing 2 1
See Drawing 2 1

Inhaltsverzeichnis

Seite 1 - See Drawing 2

fR41617ORB NEST ASSEMBLY INSTRUCTIONS Assembly of this ﬁxture will be accomplished by ﬁrst determining the length of stem required, attaching th

Kommentare zu diesen Handbüchern

Keine Kommentare

Hinkley-lighting NEST FR41617ORB Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hinkley-lighting NEST FR41617ORB herunter. Hinkley Lighting NEST FR41617ORB User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hinkley-lighting NEST FR41617ORB