Hinkley-lighting JORDAN 51354 Bedienungsanleitung PDF herunterladen

assembly instructions

Item No. 51352 / 51353 / 51354

1. Find a clear area in which you can work.

2. Unpack xture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this xture will be accomplished by rst mounting the

mounting strap to the junction box, making all necessary electrical connections, assem-

bling the main body of the xture, mounting the xture to the wall,

and then installing the glass.

start here

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Drawing 2 - Fixture Assembly

Make electrical connections from supply wire to xture lead wires. Refer to instruction sheet (I.S.

18) and follow all instructions to make all necessary wiring connections. Then refer back to this

sheet to continue installation of this xture.

1. Remove main mounting plate (A) from xture back plate (B) by removing the four at head

screws (C) - see Drawing 1.

2. Slide the wires from the junction box, through the large center hole, making sure curved slots

(D) line up with the threaded holes (E) in the junction box.

3. Using two 8-32 screws (F) attach the main mounting plate (A) to the junction box, making sure

side of mounting plate (A) is square to ceiling.

1. Mount the xture by sliding the back plate (B) over mounting plate (A) - see Drawing 1.

2. Attach the back plate (B) to the mounting plate (A) using the screws (C).

6.1.12

Drawing 1 - Fixture Mounting

wall

anchor

screw

4. Additional wall anchors supplied can be installed at keyhole points

(G)

HINKLEY LIGHTING 33000 Pin Oak Parkway Avon Lake, Ohio 44012 800-446-5539 www.hinkleylighting.com

1. To install glass remove socket ring (2) and spacer (3) from socket (1).

2. Slip glass (4) over socket (1)

3. Slip spacer (3) over socket.

4. Thread socket ring (2) onto socket (1) and tighten until snug.

Drawing 1 - Fixture Mounting 1

Inhaltsverzeichnis

Seite 1 - Drawing 1 - Fixture Mounting

assembly instructions Item No. 51352 / 51353 / 513541. Find a clear area in which you can work.2. Unpack xture and glass from carton.3. Carefully re

Kommentare zu diesen Handbüchern

Keine Kommentare

Hinkley-lighting JORDAN 51354 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Hinkley-lighting JORDAN 51354 herunter. Hinkley Lighting JORDAN 51354 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Hinkley-lighting JORDAN 51354